Technicolor COM2000 Betreibershandbuch PDF herunterladen (Seite 65)

Security - The Security column pulldown allows you to apply any of the supported security

modes to the associated channel. See Figure 39.

Channel - The Channel pulldown allows you to assign a tuner to any channel carried in the

guide, including channels that the account is not authorized to receive. See Figure 40. The SD

Duplicates radio button can be used to hide the SD versions of channels that have both SD and

HD versions.

Mode – Selects between QAM and IP mode for entering the destination of the tuned video

stream. See Figure 41. The default display mode for the Overview page can be set using the

Display Mode radio button shown in Figure 38.

Major.Minor – Selects the major and minor QAM channel to display the associated video on.

The pulldown menu will automatically try to find the next available QAM channel detected in

the network however it does update the available channel list until the Submit button is pressed.

Bitrate – Shows the bitrate associated with the selected QAM channel. If the destination IP is

not a Technicolor QAM modulator card, this field will read 0.0 and will be highlighted in red.

SNR – Shows the signal to noise ratio for the tuned channel. If the SNR is 10 or below, the block

will be highlighted yellow.

Strength – Shows the relative signal strength for the tuned channel. If the strength is -50 or

below the block will be highlighted yellow.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 127 128

Keine Kommentare

Technicolor COM2000 Betreibershandbuch Seite 65