Technicolor COM2000 Betreibershandbuch PDF herunterladen (Seite 102)

102

When you first receive your COM2000 system, your distributor should have already installed the

most recent firmware on every COM46 card. However, since we work to continuously improve

the software associated with the system, you may find it useful to stay up-to-date as future

versions are released.

Note: The latest firmware release covered in this manual is ST03.02.09.

The following sections will explain in detail the upgrade options that were touched upon earlier

within the file transfer utility located under the Tune command and on the PairingInfo page.

7.1 Preparing for a Firmware Upgrade

There are several different mechanisms available for upgrading the firmware in the COM2000.

Before proceeding any further, it is recommended that you first visit Section 5.2.1 on setting up

your network connections. If you are planning to use an external TFTP or FTP server review

Sections 5.1.5 and 5.3 on using FTP/TFTP and configuring your server in order to ensure that

everything is properly configured to perform this operation. Otherwise, one of the COM46s in

the system can be configured as a TFTP server.

7.2 Using the COM46 as a TFTP server

A COM46 in the chassis can be configured to act as a local sever for SW and license upgrades

using the Browser Upload feature in the Pairing Info page (Figure 62). To upload a new

firmware version, use the Browse… button to find the firmware file on the host system or enter

the filename into the field. Then press Upload to store the file locally on the COM46. If the

upload is successful, the filename will appear under the line “TFTP sever at xxx.xxx.xxx.xxx

current files:” Once the selected file has been uploaded, the rest of the update procedure is the

same as with the COM24/COM1000 as described in Section 7.3.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 127 128

Keine Kommentare

Technicolor COM2000 Betreibershandbuch Seite 102