Technicolor COM2000 Betreibershandbuch PDF herunterladen (Seite 63)

6.2.9 Using the COM46 “Simulcrypt” Feature

The information shown in figure below describes how to enable the use of the COM46 with a

Simulcrypt compliant encryption system such as Samsung’s LYNK

DRM system.

Figure 36 – Simulcrypt feature

SimulcryptIP – This is the IP address of the Simulcrypt (LYNK

as of April 2014) server. In

LYNK enabled systems this IP address will point to the COM46 card that has been configured as

the key server for the system or to the external LYNK key server provided by the distributor.

Port – This is the IP port of the server that will be looking for requests from the COM46 for

exchanging encryption information.

ChassisBitmap – This bit field can be used to allow an external LYNK key server to send

EMMs to multiple chassis. A one would be set for each chassis address to be supplied with key

messages. E.g. if a system has two chassis, configured as chassis 1 and 3, the ‘ChassisBitmap’

field would be set to 0x101.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 127 128

Keine Kommentare

Technicolor COM2000 Betreibershandbuch Seite 63